Feature:
1. 5 sets of fan temperature control, which can monitor and control the heat generated by computers and other equipment
2. An intelligently detect the computer temperature, and automatically increase the fan speed when the computer CPU temperature is too high or the temperature of the detection point is too high
3. When the computer is idle or the detection point is within the standard range, the fan rotates automatically to reduce fan noise
4. The PVC lens panel displays the computer's fan speed, power supply, hard disk operating temperature, alarm temperature and other working status
5. The alarm temperature can be set manually, ranging from 40°C to 90°C. When the computer temperature exceeds this range or the fan is stuck, an alarm will sound automatically, effectively avoiding hardware damage due to overheating
How to Use:
1. Disassemble the two front panels of the chassis
2. Connect the corresponding wires
3. Put in the product
4. Lock the screws on the side of the chassis
Specification:
Item Type: Computer Temp Monitor
Material: ABS, Printed Circuit Board
Model: 33C05-RTK
Installation Position: Chassis Optical Drive Position
Power Supply Interface: Large 4 Pin Interface
Fan Interface: 5 x 3 Pin Interface
Controllable Fan: 5 Groups of Fans Can Be Controlled
Cable Length: Fan Wire Approx. 60cm/23.6in
Luminous Color: Color
Input Voltage: 5v/12v
Output Voltage: 5v-12v
Power: Single Group 10w (50w in Total)
Package List:
1 x Computer Temp Monitor
4 x Screw
1 x Sticker