2.8inch TFT Handheld Digital Oscilloscope Kit Portable Automotive Oscilloscope, 2.5MS/s High Sampling Rate, 200 KHz Bandwidth, Trigger Function Auto/Normal/Single

The oscilloscope has a real-time sampling rate of 2.5MS/s, abandwidth of 200KHz, and complete trigger functions (single, normal, and automatic).
It can be used freely for both periodic analog signals and non-periodic digital signals, and can measure voltages up to ±400V.
Equipped with an efficient one-key AUTO, it can display the measured waveform without cumbersome adjustments.
Equipped with a 2.8-inch 320*240 resolution high-definition LCD screen.
Built-in 1000mAh high-quality lithium battery, can be used continuously for about 4 hours after fully charged.

Sampling rate：2.5MS/s
Bandwidth：200K
Vertical sensitivity：10mV/Div-20V/Div(Progress according to the 1-2-5 way)
Time base range：10μs/Div-50s/Div(Progress according to the 1-2-5 way)
Voltage range：X1:士40V (Vpp:80V) X10: 士400V (Vpp :800V)
Trigger method：Auto/Normal/Single
Coupling method：AC/DC
Display：2.8 inches/PPI:320*240
USB charging：5V/1A
Lithium battery capacity：1000mAh
Square wave calibration：Frequency: 1K Duty cycle: 50%
Size：99x68.3x19.5mm
Weight：100g
【PS】:
Chromatic Aberration Controversy:
1.Because of different camera lens and light environments, the real item color which you receive maybe little vary from the listing picture. I sincerely hope that you can understand! Thank you!
【Size】:
1.The product size is measured manually, there will be a little error, but it is within the normal range.
2.The size of the product is manually measured. Due to different measuring methods, there will be an error of 1-3cm. If you cannot confirm it, please check the listing again.