TOOLS Fibre Optic Stripper Stripping tool for optical fibres and fibre optic cables

OverviewWEICON TOOLS Fibre Optic Stripper| Stripping tool for optical fibres and fibre optic cables. APPLICATION: Set the length stop to the desired length press the two handles of the stripper together place the cable through the conical opening on the tool head between the opened pair of blades (the precisely adjusted torsion springs automatically cut the primary coating with the appropriate pressure) Release the handles and pull off the primary coating with the tool and remove it cleanly. ready! TECHNICAL DATA: Cable type: glass fibre Ø 0.125 mm (125 μm) with primary coating Ø 0.200 - 0.250 mm Application range: removal of primary coating from 200 - 250 μm Inner blade: fixed, not exchangeable Working range length stop: 5 mm to 45 mm FEATURES: The stripping tool was specially developed for removing the primary coating of the finest optical fibres and fibre optic cables. The fibre optic stripping tool is made for fibre optic cables in the range of 0.125 mm. The blade has a hole of 0.16 mm in diameter and is optimised for removing primary coatings of 200 to 250 µm. It is compact | suitable for right- and left-handers and enables precise & non-slip working. The pliers can be comfortably adjusted between 5 and 45 mm. The funnel-shaped cable feed on the tool head has a diameter of 0.35 mm and ensures effortless and precise feeding of the fine glass fibre. The 2020 Red Dot Design Award-winning tool with automatic tracing system is ergonomically shaped and made of glass fibre-reinforced polyamide. SAFETY AND HEALTH: Working with WEICON stripping tools is only permitted on potential-free, non-energised cables and wires.