20PCS Round Electrodes Pads 1.25" Reusable Carbon Electrotherapy Pads for EMS Muscle Stimulator with 2.0 mm Pigtail Connectors Reusable Skin Patch for Muscle

Warm Tips:
Before Application:

1. Clean and dry the application area. Remember you should only apply electrodes to unbroken skin.

2. Open and remove electrodes from packaging. Remember to keep the original packaging.

3. Peel electrodes away from release sheet by lifting the edge of the electrode. Do not pull electrodes up by the wires.

4. If electrodes seem dry, or the pads don’t stick, add a few drops water to moisten gel and wait a few minutes to allow water to re-hydrate the adhesive gel.

5. Place electrodes on treatment area. Apply finger pressure to the edges and press down on entire electrode to assure adequate contact with skin.

Removal:

1. Gently peel off the electrodes.

2. Wipe off electrodes with a non-alcohol wipe or rinse with cold water and wait for it to dry. Sticky side should remain up so it does not adhere to anything.

3. Place the sticky side of the electrode on the clear sheet it arrived in and put back in the packaging.

4. Store electrodes in a cool, dry place not exposed to bright light or any extreme temperature as it may have a permanent adverse effect on the gel. Electrodes can also be kept in the fridge to maximize their lifespan.