ASV Throttle Body & Air Intake Cleaner

Directions for use Keep away from electrical connections and battery terminals. NOT FOR USE ON vehicles fitted with super or turbo chargers or diesel engines. DO NOT use on painted surfaces or sensitive plastics. DO NOT spray through air filter or mass air flow sensor. Turn off the engine and remove air induction hose from throttle body. It may be necessary to remove the mass air flow sensor. Place a shop rag/cloth under the throttle body to soak the spent runoff and dissolved deposits. With throttle in wide open position, spray liberally on both sides of throttle plate, ports and surrounding air intake area. DO NOT spray continuously. Clean throttle parts and linkages completely with a clean shop cloth. Re-install mass air flow sensor, air induction hose and filter. Note: If spilled or sprayed on painted surface, wipe off or wash off immediately as paint may be affected. General Use in well ventilated areas. Avoid continuous breathing of vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product's safety data sheet (SDS). Handling Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safety, short and long term exposure, physical and health hazards and is available from ASV or your local ASV distributor. Disposal All used and unused product should be disposed of in accordance with state regulations. Limited Warranty The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended ASV product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of a