Automatic Commercial Indoor Air Curtain With Two Speed up to 21m/s | Spray Coating | Rust Proof | Remote Control | Low Maintenance 300 W GCT9025CTM White

OverviewGeepas Air Curtain - Commercial Indoor Air Curtain An air curtain is a powerful fan that creates a high speed air stream over the entrance to isolate the interior and exterior air environment. It is energy-saving and helps to keep the conditioned air stay inside the interior and avoid the entry of hot or cold air, smoke, and other foreign objects. Airflow Conversion- The commercial indoor air curtains effectively keep the conditioned air stay inside the interior and avoid the entry of hot or cold air and other foreign objects. Large Air Flow- The high-power motor ensures large airflow. The one-piece wind deflector design is adopted, and the wind direction can be adjusted by hands or remote to adapt to various environments. Energy-Saving Design- The limit switch can be installed on the door. When the door is opened, the door air curtain automatically starts to work, and when the door is closed, it automatically closes. Terms & Conditions for AC Installation – UAE Covered under Standard Installation: • Drilling of holes into a brick wall for routing pipes. • Fixing of hole sleeve and cap. • Installation and connection of indoor and outdoor units using the standard installation kit provided with the product. Not Covered under Standard Installation (Additional charges apply): • Provision or installation of outdoor unit stand. • Extra copper piping or wiring beyond the standard kit. • Extension of drain pipes. • Electrical wiring extension from the meter to the installation location. • Vinyl tape or other additional consumables. • Dismantling or relocation of existing air conditioning units. • Sealing of holes with white cement or similar materials. • Provision or installation of voltage stabilizer. • Plumbing or masonry work. • Power socket/MCB installation or other electrical services. • Carpentry work. • Core cutting, fabrication, or any electrical customization. • Installation work beyond a height of 3 meters. • Removal and disposal of existing unit and packaging materials. • Any change in installation location after service initiation. Customer Preparations Prior to Installation: • Obtain permission for drilling and product movement within the premises. • Ensure no water pipes obstruct the wall where drilling is required. • Confirm availability of service lift or wide staircase for moving the unit. • Ensure existing installations are removed if a new unit is to be installed at the same location.