Automatic Door Closer Safety Wheel Roller Spring Door Closer Easy to Install to Convert Hinged Doors to Self Closing Diecast Construction White

OverviewConvert your hinged door into a self-closing one with the safety spring door closer. 

Installation is a breeze thanks to the closer and plastic slide plate being surface mounted – within minutes you can have a self-closing door! 

Distance of Travel: 

The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. 

These closer feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. 

These closer operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. 

Fixing Instructions:

1. Fix the closer vertically to jamb on the hinged side of the door.

2. To set tension turn the center of the closer opposite to the arrow.

3. Place the operating arm into the nearest hole to the door.

Notes:

- After the door closer is fully installed, you can fill the hole with the included plugs.

- Please install the door closer at exact position.

- You can adjust the tension as needed by the adjusting rod.