Bgr-12 WIFI Wireless Siren Alarm System Mobile Applied Data Security

BGR-12 WIFI Wireless Siren Alarm System with Mobile Application (1 Year Ahm Free)

Wifi Siren Alarm System Set Content

• 1 WIFI Siren Alarm Panel
• 1 Wireless Motion Detector
• 1 Door & Window Sensor (Magnetic Contact)
• 1 Piece Remote Control
• 1 Piece Adapter

General Features and What You Can Do via Opax Mobile Application.

• High Visibility and High Deterrence with its Flashing Working Principle like Red and Blue Police Siren
• 110Db High Sound Power
• Ability to introduce Wireless Motion Detector, Smoke Detector, Flood Detector or All Wireless Sensors on the Mobile application
• Instant notification to unlimited users and Voice Alarm Call feature to all users over the Internet
• Full compatibility with Alarm News Receiving Centers, 1 Year free AHM News Alarm Support
• 99 Detector Identification Capacity (Smoke Detector, Motion Detector, Flood Detector, Door & Window Detector, Panic Button)
• 8 Remote Control Identification Capacity.
• High capacity Lithium Battery (3.7V/1200mAh) against power outages. Possibility to work in 12-Hour Stand-By state during power outages
• Possibility of remote updating via mobile application
• High Deterrent Siren Sound with 2 Piezos
• Tamper Switch Protection against removal of the siren
• Every time you arm or disable your alarm panel, an Arming/Unlocking sound is heard through your External WIFI siren, you can activate/deactivate this feature.
• You will receive notifications on your mobile phone every time the alarm is activated or deactivated. You can turn off these notifications if you wish.
• Ability to Add Wifi Siren to Mobile Application with 2 Different Setup Features (WIFI AP mode and One Button Mode)
• Instant notification sending feature in case of power outages
• You can activate and deactivate your alarm panel on the Mobile Application. You can also perform the same operations via the Remote Control.
• It is the installation type that enables you to move around the house comfortably and prevent any outside person from entering by activating the In-Home Installation mode. When the in-home alarm setup is activated, the motion detectors you specify allow you to move around your house while you are inside and do not sound the alarm, but the other detectors are always active.
• You can add all your wireless motion detectors, window and door sensors, smoke detectors and remotes and delete or bypass them whenever you want.
• By pressing the SOS button (panic button) on the mobile application, you can easily reach the police forces, fire brigade and ambulance in case of any emergency, thanks to the Panic button application.
• You can see which user activated and deactivated your alarm panel at what time.
• You can see the alarm history through the application, you can see historical reports of when the alarm went off, from which region it came, at what time.
• You can instantly see the battery level of your alarm panel, wifi signal level, whether there is a power outage, the mains electricity status, and you can instantly view the status of the module connected to the panel.
• You can view and change the Date/Time information of your panel from the Time settings section.
• You can make or update the connection settings to the Alarm Information Receiving company online from the SIA-Ip settings section.
• You can instantly follow which regions are active online from the region settings section. Even when your alarm is disabled, you can see online in which rooms or in which area there is movement.
• You can turn off any alarm zone, any detector and all accessories you want, whenever you want, online. (Bypass)
• You will receive notifications every time the alarm is activated and deactivated, you can turn off these notifications if you wish.
• When any detector's battery level gets low, you will receive instant notification. It will continue to send you notifications as long as you do not change the battery. It starts notifying you 3 months before the battery runs out. The battery life of Opax motion detectors starts from 3 years.
• You will receive instant notification when the electricity at your home or workplace is cut off. If you wish, you can also set the alarm to sound during power outages.
• You can define an entry time or exit time to your alarm panel. If you are going to enter your home or workplace by typing your password on the keypad, a certain period of time for you to enter your password from the keypad is called the entry time. However, if you control the alarm via remote control or mobile application, you do not need to specify an entry time.
• You can delete all users of your alarm and change their passwords. You can define different permissions for each user, such as activating only the alarm, disabling the alarm only or all of them.
• You can share your alarm panel with every user who has installed the Opax alarm application. You can give Full authority to whomever you wish, only Enable/Disable or All authority.
• Every time you arm or disable your alarm panel, an Arming/Unlocking notification sound comes through your external siren, you can activate/deactivate this feature.
• You can define any of your detectors (motion detector; Door & Window Sensor) as "Hidden Silent Alarm". When you define the magnetic Contact (Door & Window sensor) that you insert into the drawer of your choice as a silent alarm, even if the alarm is disabled, when anyone opens your drawer or enters a room you do not want, the alarm will not sound, you will only receive an alarm and call via the mobile application, in this way, the alarm is disabled. In situations where you enter your private places, the alarm does not sound and only informs you, thus continuing to protect you even when the alarm is disabled.
• With the "Door Open/Closed" feature, it does not allow you to set an alarm without closing your open windows or doors, and you can make this feature active or passive.
• You can give the "Door Bell" feature to any detector or door & window sensor you want. When the detector you have selected detects movement while the alarm is disabled, it emits a "Dinnn-Donggg" sound on the panel, notifying you that someone has entered your workplace or home.
• You can have your alarm automatically activated and deactivated on the days and hours you specify. You can have more than one option, different on weekdays and weekends.
• You can name all wired or wireless detectors you have added to your panel. It notifies you at the time of alarm with the name you specify.
• By defining "24-hour Zone" for all detectors you want, you can ring the alarm and notify them immediately when it detects a signal, whether the alarm is set or not. (Smoke detectors, Flood detectors, Gas Detectors, Heat detectors, Sensors mounted on the Case, etc.)