HT118A Digital Multimeter
Main functions:
AutoRange/Analog Bar Display/True RMS/NCV/Data hold/Back light/LED lamp/Diode test/Triode test/Continuity/Over load protection/Low Battery Indication/Auto Power Off/Short-circuit protection.
NCV:
Place the multimeter close to the AC voltage source (no wire is required) and the multimeter will display the voltage and give a corresponding prompt.
HTN full-viewing angle screen, 180 degree viewing angle:
Has two LED backlights, Display is brighter than other sellers'. When the measured voltage exceeds 80V or current exceeds 1A, the white backlight will turn orange as a danger warning.
Wide range of applications:
car repair, industrial circuit inspection, home circuit check.
Specification:
☞Safety Level/Certification: IEC-61010-1 CATⅢ 1000V, CAT IV 600V, double insulation
☞Display: True RMS, 6000 counts, 3 5/6 digits
☞Overload Display: Display OL
☞DC Voltage: 600mV/6V/60V/600V±(0.5%+3), 1000V ±(0.5%+3)
☞AC Voltage: 600mV/6V/60V/600V/750V±(0.8%+5)
☞DC Current: 600μA/6000μA/60mA/600mA/10A±(1.2%+3)
☞AC Current: 600μA/6000μA/60mA/600mA/10A±(1.5%+3)
☞Resistance: 600Ω/6KΩ/60KΩ/600KΩ/±(1.0%+3),6MΩ/60MΩ ±(1.5%+3)
☞Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf±(4.0%+5), 10MF/100MF±(5.0%+5)
☞Frequency/Duty:10Hz/100Hz/1000Hz/10kHz/100kHz/1000kHz ±(1.0%+3),10MHz/±(3.0%+3)
☞Temperature: -20℃~1000℃(2.0% reading +2 digits),-4~1832°F(2.0% reading +4 digits)
☞Diode:0.15V-2.5V(Forward DC: about 1mA; Open circuit Voltage: about 2.5V)
☞Continuity: 0~100Ω(Open circuit Voltage: about 2.5V)
Package Content:
1 x HT118A Multimeter
1 x Test Leads
2 x AA Battery
1 x User Manual
1 x Thermocouple
Model Number | GJ090 |