Highlights- Five-bit or six-bit display can be switched by oneon , with the maximum resolution of 0.00001, which can real time monitoring of the subtle changes in voltage, current and power during recharging.
- This product uses USB3.0 interface, 9 pin design, downward compatible with USB2.0,+ times the transmission rate of USB2.0.There is no need to match the original data cable, it can also directly test the recharger agreement of some mobile phones.
- It is in small size, so you can take it with you to anywhere you want to use it, or you can take it and share it with your friends.
- This product can record 10 sets of measurement data, you can use the data you get to calculate the capacity of battery.
- This product directly add the calculate formula on this product, the result multiply 1000 to get the capacity of battery.
OverviewSpecifications:
Material: ABS
Monitor voltage: 4~24V
Monitor voltage resolution: 0.00001V
Monitor voltage accuracy: ±(0.2%+2)
Monitor current: 0~6.5A
Monitor current resolution: 0.00001A
Monitor current accuracy: ±(0.5%+2)
Monitor power: 0~156W
Monitor current resolution: 0.00001W
Monitor current accuracy: ±(0.5%+2)
Load equivalent international resistance: 0~9999.9Ω
Load equivalent international resistance resolution: 0.0001Ω
Load equivalent international resistance accuracy: ±(0.5%+2)
Capacity: 0~9999.99Ah
Energy used: 0~9999.99Wh
Cable resistance: 0~9999.99Ω
D+/D- voltage: 0~3.3V
D+/D- voltage resolution: 0.001V
D+/D- voltage accuracy: ±(1.0%+2)
Equipment temperature: ℃/℉
Package size: 91 * 63 * 19mm / 3.6 * 2.5 * 0.7in
Package weight: 55g / 1.9ounce
Note:
This APP only supports Android 5. 1 or above, BT 4.0 or above, and does not support IOS system temporarily. Since the device uses a BLE BT module, So you cannot connect to FNB48 through system settings, you need to search and connect in the APP.