Hidden Camera Detectors - Infrared LED Spy Detector for Anti Spy, GPS Tracker, Wireless Signal Scanner - Find Hidden Devices and Cameras in Apartments, Hotels, Locker Rooms

Scope of use 1 . Detect whether your car or office has been equipped with wireless wiretaps, wireless bugs, etc. 2 . Detect whether your mobile phone is being wiretapped or abnormal (emiting signals for no reason in standby mode). 3 . Detect whether your car is equipped with Gps tracking wiretaps and determine the location where the tracker is installed 4 . Detect more concealed 5.8 GHz wireless network cameras, bugs, and wireless monitoring signals. 5 . Check for pinhole cameras in hotels, restrooms, hotels, entertainment venues, and changing rooms to prevent wireless pinholecameras from photographing personal privacy 7 . Prevent wireless wiretapping in conference rooms, offices, private dinners and other places to prevent sensitive calls from beingleaked. 6 . Prevent wireless wiretapping in places such as ATM machines, theaters, art galleries, and museums. 8 . Detect whether there is radiation from rooftop base stations in your work environment or residential buildings, and determinethe direction of the base station location and the strength of the base station radiation. 9 . Detect the sending and receiving signal of Sis service, cell phone Internet signal, cell phone on, of and call signal. 10 . detect wireless network signals, cell phone base station signals and wireless monitoring system field strength size and thelocation of the field strength size orientation. 11 , Detect whether household appliances such as microwave ovens leak electromagnetic radiation harmful to humans. 12 . detect whether you are in the environment is known as the "cell phone killer" strong radiation. 13 , Detect whether there is a suspicious radio signal in your environment and determine the location of the radio signal point. 14 , Buy a building, first detect the electromagnetic radiation that is harmful to human health. How to use ? A: Detecting Cameras 1， press and hold the power switch key for5 seconds to turn on the device, and the signaldsplay light is on (white light). 2， pres the power switch key once, and the camera recognition light begins to bink bispty lred), move the detector up anddown and left and right to scan the surrounding environment with infrared. 0bserve through the optical filter lens window. lf thereis a camera lens in front of you, you will find a strong bright spot flashing. 3， Press the power switch key again, and the camera recognition light blinks faster; press the power switch key again, and thecamera recognition light stays on. Three red light modes can adapt to the preferences of various people. 4， Press and hold the power switch key to turn off.(Wireless Cameras/Bugs, GPs Trackers, etc.) B: Detecting Radio Waves 1， Press and hold the power switch key for 5 seconds to turn on the device, and the signal display light is on (white light). 2， Move the detector to search for signals, and the signal prompt light flashes with sound prompts, indicating that there is atransmission source. When approaching the transmission source, when the signal becomes stronger, all four signal indicator lightswillight up at the same time, and the sound wil become louder and faster. 3， Press the sensitivity key buton to switch the signal sensitivity, a total of 3 levels: weak, medium, and strong. 1 white light is on for weak signal search; 2 white lights are on for medium signal search; 3 white lights are on for strongest signal search. Adjust thesensitivity to reduce the detection range and finally find the transmission source. 4， Press the power switch key once, then press and hold the power switch key to turn of.