Ignition Coil Tester Tool, Automotive Electronic Faults Detector, Car Spark Tester and Voltage Tester Pen, Spark Tester Pen with LED Display & Two Batteries

Ignition Coil Test & Generator Test

① - Ignition Coil - Not Work

• When the ignition coil is not working or damaged,status indicator LED1 and LED2 off,the beeper has no sound.

② - Ignition Coil - Work

• When the ignition coil is working,status indicator LED1 and LED2 is flashing,the beeper is making sound continuely.

③ - Generator - Not Work

• When the generator is not working or damaged,status indicator LED1 and LED2 off,the beeper is not making sound.

④ - Generator - Work

• When the generator is working,status indicator LED1 and LED2 is flashing,the beeper is making sound continuely.

Safe Operations

1. The car to be tested should park at an area with good air condition,can't into exhaust emission from engine
2. The car to be tested should be far away from and fire source;The gasoline engine and chargeable battery is possible to occur explosive air,so it's very necessory to prepare fire extinguish gears accordingly
3. During test process,it's necessory to avoid the moving parts and heat source to protect tester and testing equipments
4. To be far away from the cooling fan of engine
5. Don't put other equipments on the battery which is possible to make the battery inside to be Short,which may cause hurt or damage of tester and equipments
6. Do to turn off the ignition switch before connecting or remove electrical parts
7. Don't leave the car during the test
8. Pls confirm the gear position of the car: automatic is at P;manual is at blank;Do push tight of manual brake;put blocks before the driving tyres
9. Pls read relative warnings from car manufacturer,pay attention to the important warning information