Joypad Controller, Joypad Support 3 different light modes，Wake-up Function,Ergonomic hand-fit design,Bluetooth Wireless Joy Con Controller with Dual Vibration and Gyroscope axis Green/Blue

OverviewConnection mode Method 1: Plug the slide rail into the host for use,and pull out the slide rail to automatically connect to the host via Bluetooth Method 2:When the device is turned offpress the pairing button for 3 seconds to pair Short press the Home button to connect back Lighting control instructions 1.T+R3/L3:Monochromaticlight longbrightmode Overall light color change:click to changea colorsequencered/yellow/blue/green/pur- ple/orange/white/phantom,cyclic change. 2.T+(doubleclick)R3/L3:breathingmode First time:MonochromaticLED Symphony Breathing Second time:RGBseven-color breath Third time: turn off the lights 3.Light brightness adjustment T+rocker up button can increase the light brightness of the handle,T+rocker down button can reduce the handle light brightness Turbo Continuous Function Turbo and AUTO TURBO functions 1.TURBO setting Press(first time)A/B/X/Y/L1/L2/R1/R2/cross key and Turbo key to set Turbo function; press TURBO again (second time) and set Turbo Press the TURBO button again (the third time)to cancel the TURBO function;long press the Turbo button for 5 seconds to clear the currently set Turbo function of all buttons of the burst handle.Vibration prompt; 2. The TURBO speed adjustment speeds are: A5consecutive shots per second(1stgear);B 12 consecutive shots per second(2ndgear);C20 consecutive bursts per second(3rd gear); Left handle adjustment method: Press the TURBO button and the"-"buttonpress the speed to increase one gear,and adjust three gears and cycle in turn Right handle adjustment method: Press the TURBO button and the"+"button, press the speed to increase by one gearand adjust three gearsand cycle in turn Motor vibration regulation Press the motor vibration adjustment key to adjust the motor strength. Independent motor vibration is divided into 5gears:100%,75%,50%30%offafter the adjustment is successful,the motor will vibrate for 0.5 secondsTurn offand then turn on the machine to remember the last ad usted gear,and the motor vibration will cycle in turn (the left and right handles Programmable function 1. Macro function Long press the right M button and do not release it.Enter the button you want to edit (up to 20steps).After releasing the MR button,the handle willvibrate briefly, Press the MR button again to trigger the macro button. Press and hold the left button and do not release it.Enter the button you want to edit (up to20steps). After releasing theML button,the handle will vibrate briefly. Press the ML button again to trigger the macro button. The macro editable keysare ABXYL1R1L2R2L3R3+-cross keystwojoysticks (can be used as a combo in the game),and cannot be recorded long key value. 2. Mappingfunction Long press the right M button without releasing it,and enter the single button you want to map. After releasing the MR button,the handle will vibrate briefly. Press the MR button again to trigger the mapping button. Press and hold the left M button without releasing it,and enter the single button you want to map. After releasing the ML buttonthe handle will vibrate briefly. Press the ML button again to triggerthe mapping button The editable kevs are mapped to ABXYL1R1L2R2L3R3+-cross keys(4 keys. up,down, left and right),long press cannot be recorded 3.Clear the mapping and macro keys: After long pressing the MR button and not releasing it without any inputrelease the MR map and the macro button toclear the After long pressing the ML button and not releasing itno input is made.After releasing it, the ML mapping and macro buttons are cleared.