OverviewManual mode: Move the button to mode 2
Adjustable M/S key, press the middle button ST/SP to start the countdown
Timing: 1. When the display is 00:00, short press the [SP/ST] button to start timing;
During the timing process, short press the [SP/ST] button to pause/start the countdown;
3. In a paused state, long press the [ST/SP] key to reset to zero.
Countdown setting: 1. Short press the [M/S] key to gradually increase the countdown time, long press the [M/S] key to quickly increase the countdown time. After setting, short press the [SP/ST] key to start the countdown;
During the timing process, short press the [SP/ST] button to pause/start the countdown;
3. In a paused state, long press the [SP/ST] key to reset to zero;
4. After the countdown time reaches 00:00, there will be a one minute long alarm clock (the "Didi Di" LED screen will light up/the sound will stop, and the LED screen will turn off - these two prompts are grouped in a 1-second cycle - to remind you).
Silent mode vibration reminder.
5. Memory mode: After the countdown ends, briefly press the [SP/ST] button again to display the current set time. To reset to zero, press and hold the ST/SP button. Short press to cycle through the operation again.
Notes:
If the user forgets to turn off the device, or if there is no action after 5 minutes, the product will automatically go to sleep;
2. After the countdown ends, the alarm duration is 1 minute;
3. After hibernation, if the shutdown gravity mode is not toggled, it can be flipped and used immediately. The manual mode can be adjusted with just one press;
In silent mode, there is vibration feedback at the end of the timer or any operation. There is a "beep" feedback during operation in volume mode;
5. If the battery level is below 10%, the screen will flash, reminding to charge. The charging process will light up with a red light, while the fully charged green light will remain on