MIG Welder,2 in 1 Flux core/Stick Welder,120Amp Gasless MIG Welding Machine with Synergy，IGBT Inverter Welder，Portable Wire Feed Welder

1. Wire feed system troubleshooting Specification match check to confirm current wire diameter (1.0mm or 0.8mm).

• If using 0.8mm wire:

✓ Immediately replace with a 0.8mm dedicated wire feed wheel (currently configured as 1.0mm, which will result in insufficient friction).

✓ Simultaneously replace the 0.8mm conductive nozzle (hole diameter mismatch will result in wire jamming).

• Quick self-check steps

✓ Check whether the wire feed wheel compression spring is adjusted to the appropriate pressure (it is recommended to refer to the torque value in the manual).

✓ Clean the metal debris in the wire feed wheel groove and wire guide tube (degradation will cause slippage).

2. Saudi Arabia high temperature environment operation specifications

• Strictly follow the 15 minutes continuous operation → 2 minutes equipment cool down cycle (high temperature will trigger the motor overheat protection).