POE Extender RJ45, 4-Port 10/100M Gigabit, Ethernet Extender Kit, IEEE802.3at (Power-in) to IEEE802.3af (Power-Out)1 in 4 Out POE Repeater Comply with AP,IP Camera,IP Telephone,Cat5/Cat6

Overview★★★Why Choose Our PoE Extender?★★★ ✅ Proper Usage: Designed exclusively for network equipment with PoE signal function, this product acts as a relay to extend signals. The total output power is 25.5W, and the maximum output for each of the 4 ports is 15.4W. However, each port cannot simultaneously output 15.4W. Ensure the total power output across the 4 ports is less than 25.5W. ✅ IEEE802.3af Standard: Supports 10/100Mbps data rates and complies with IEEE802.3at and IEEE802.3af standards. Provides 802.3af power levels when powered by any 802.3at source. ✅ High-Quality Transmission: Use high-quality transmission cables to achieve up to 100~120m distance. Poor quality cables may limit transmission to 80 meters. Ensure the power consumption of front-end devices does not exceed the capacity to maintain adequate working voltage. ✅ Applicable Range: Ideal for use with APs, IP cameras, IP telephones, and other network equipment where power lines are scarce or far from power outlets. Suitable for installation in hotels, schools, buildings, etc. Follow the product instructions and power requirements strictly for optimal performance. ✅ Specifications: Port Description: PoE input-1 RJ45 port, PoE output-4 RJ45 ports Network Medium: Cat5 or better UTP cables (less than 120m) Repeater Mode: Store and forward MAC Address Table: 2K Packet Buffer Memory: 48 Byte Switching Capacity: 400Mbps ★★★What You Will Get★★★ 1 * PoE Extender ★★★Warm Notice★★★ Use high-quality cables for optimal performance. Ensure the total output power of connected devices does not exceed 25.5W. Follow the manual guide for installation and operation to meet project requirements.