Resin Epoxy Coaster Leaf Model - Code: 355

Resin Epoxy Coaster Leaf Model

136mmx92mm

Resin epoxy silicone injection molds are heat-resistant and easily separated, that is, they can be removed after the product has dried, and they are resin epoxy molds that can be preserved in hot environments with a high temperature of 200 to 300 degrees on average. In addition, our silicone molds are resin molds that can be used many times and are not disposable. Resin epoxy molds, which can be used in many areas, can create differences in many sectors depending on your imagination. We currently have more than 180 models of resin epoxy molds in Turkey.

Usage: Pour 1 measure of hardener into a container with 2 measures of resin and mix slowly until there are no air bubbles. Continue mixing from right to left and from left to right.
and mix thoroughly from bottom to top for 2-3 minutes. While mixing
A homogeneous mixture should be achieved by touching the bottom and sides of the container with the mixing stick.
Then the mixture is rested for 5 minutes and poured into the mold and left to dry. 
It can be touched by hand after about 6 hours. It hardens completely within 12 hours. 48 hours
It becomes an unscratchable glass. Color: Transparent