RJ45 Ethernet Switch Selector, Bi-Directional Splitter, 2-Port Network Switch Distributor, 1 In 2 Out or 2 In 1 Out, 100M Plug & Play Intranet Adapter with Switcher.

RJ45 Ethernet Switch Selector, Bi-Directional Splitter, Transmission 2 Ports Network Switch Distributor, Hub 2 in 1 Out or 1 in 2 Out 100M with Switcher Intranet Adapter, Plug & Play

Setup:

Connect the network switcher to your existing network router or switch using a standard Ethernet cable.

Plug your computers or devices into the corresponding ports labeled "Device A" and "Device B" on the switcher.

Switching Between Devices:

Press the switch button on the network switcher to toggle between Device A and Device B.

Ensure only one device is active at a time to avoid network conflicts.

Indicator Lights:

Check the indicator lights to see which device is currently connected and active.

Green light indicates the active device, while the other port remains inactive.

Maintenance and Care:

Keep the network switcher in a well-ventilated area to prevent overheating.

Avoid exposing the switcher to water or moisture to prevent damage.

Regularly inspect cables and connections for any signs of wear or damage.

Power Requirements:

Use only the provided power adapter to avoid damage to the network switcher.

Ensure the power adapter is plugged into a stable power source to maintain uninterrupted operation.

Handling:

Handle the network switcher with care to prevent physical damage or disconnection of cables.

Avoid pulling on the cables forcefully when connecting or disconnecting devices.

Network Compatibility:

Verify that your devices and network settings are compatible with the network switcher.

Consult the user manual of your devices for specific network configuration requirements if needed.