Rose diamond table lamp usb charging touch lamp

OverviewOPERATING INSTRUCTIONS The lamp is turnedon and off by touching its upper side. To change light intensity, touch and maintain contact on the same side; light intensity will change from 100% to 50% and then to 25%. (See number 1 on the graphic) In order to switch color, touch the upper part of the base as It's shown in the number 2 of the drawing. When the battery is discharged, the lamp can work through the micro-USB connection in IP20shielded Indoor spaces. Sultable - for IP54 outdoor areas. Put into operation on a level, sold surface protected against overturning exclusively Make sure that the micro-USB socket is closed before using outdoors. BATTERY CHARGE- Connect the micro-USB to the charge port on the base of the lamp and plug the opposite side In the power outlet. Ablue light In the micro-USB outlet Indicates the charging process. (See number 3 on the graphic) Charge the battery for over 7 hours to reach the optimal level of charge. The blue light in the micro-USB outlet turns off when the lamp la fully charged. A full charged battery supports about 12 hours of continuous usage. To ensure the optimal performance of the battery. we suggest it to be discharged and recharged comptetely for the first 10 cycles. Charge the battery as soon as possible after it gets empty: the battery life will be suffer if it is left empty for a long period. BATTERY REPLACING- Use only the original rechargeable battery pack. Do not use under any circumstances regular batteries, because It can be dangerous. In order to get a replacement battery. please contact Manufacturer BATTERY REMOVAL- Make sure that the product is not connected to a power source.- Remove the bottom surface by loosening is 4 screws; take the connector apart and remove the battery by ungluing it. Take the battery to a suitable processing center.