Soil Tester, Plant Moisture Meter for Testing Soil Fertility, Moisture, PH, for Garden, Farm, Lawn, Potted Plants, etc., with 3 Mini Garden Tools and Storage Bag - Blue

OverviewLet our plants grow better!
This soil tester is designed to better understand your plant status, track soil moisture, determine soil ph and determine if there is enough fertility to make the plant healthier!

How to use
1. Slide the switch to the FERTILITY/MOIST/PH position as needed.
2. Insert the probe about 10-13 CM (2/3 of the probe) into the ground.
3. After waiting 10 minutes, write down the value for fertility/moisture/soil pH on the dial.
4. Remove the probe from the floor and wipe it clean after each use.

Measuring Range
-- Fertility sensor
Pointer to LITTLE (yellow part)
Pointer to IDEAL (blue part)
Pointer to MUCH (red part)

-- Humid sensor
Red: 1-3 (dry)
Green: 4-7 (humidity)
Blue: 8-10 (wet)

-- PH sensor
PH 3.5-7 (acidic)
PH 7-8 (neutral)
PH> 8 (alkaline)

Important NOTE
1. Liquids cannot be tested with the soil tester, only the soil can be measured.
2. Since ordinary soil is often neutral / nearly neutral (pH 7), the needle in the display window is likely to remain stable (since the standard pH is between 7 and 8).
3. Do not use the probe on hard ground and avoid touching stones to avoid damage.
4. If the soil is dry and the pointer doesn't move, please water it and wait 30 minutes before testing.
5. Do not put the plant moisture meter in the soil for a long time (1 hour). Please wipe the probe clean after use.
6. Do not touch the metal with the probe at the same time. Keep it in a special bag after use.

Products Include
1 x Floor tester
3 x Mini garden tools
1 x Special storage bag
1 x User manual

Reminder: Electronic precision instruments should be cleaned and effectively protected after use to prevent children from playing.