Tofaş Compatible Adhesive Battery Operated Door Bottom Logo with Distance and Darkness Sensor

If you add 1 piece to your cart, 1 box will be sent

There are 2 items in the box

It has a distance sensor,

It has a day light (Photocell) sensor,

It does not work when it is not visible in very bright environments,

Thus, it saves battery,

The best use is with a quality alkaline battery.

You just need to apply it on the inside of the door wherever you see fit,

You do not need to use magnets,

It works when the door is opened,

No electrical connections or drilling and cutting required

It is very easy to assemble,

 

Application:

 

Apply in a slightly dark environment, U   Clean the surface on which you will apply it. If you are not doing this in the dark enough, fAutocell (Day Sensor) may not operate the device,  Lower the vehicle's window all the way down, Hang from the window from outside to inside of the vehicle with the door closed and move it towards the door sill (Downward Direction) so that the device sticks to the inner door trim while the device is running with its batteries installed. When the distance sensor detects the door threshold, the device will turn off. In this case, you can complete the installation by sticking the device to the location, If it does not detect the door distance due to the flooring (floor carpet, etc.) or if the distance of the device is not sufficient because the interior flooring of the door is too deep, you can paste the gray label sent with the product so that it is directly under the sensor when the door is closed.