Tooth Repair Kits Customizable Temporary Denture Molds to Restore a Confident Smile

How to use Step1.Drop into hot water With the fitting material attached onto the back of the teeth, drop the teeth into hot water. If the water is hot enough, the fitting material should be soft and pliable after 1 minutes. If after 1 minutes the material is not soft, you will need to use hotter water and try again.
Step2.Fit the teeth into place Once the fitting material is soft, gently press the teeth onto the front of your existing teeth. Firmly hold the teeth in place and use your thumbs to press any excess fitting material up and around the back of your natural teeth. After 1 minute gently remove the teeth and set them cool immediately in cold water.
Step3.Let the fitting material cool and then try them on Once the fitting material has cooled and hardened, you can place the teeth back into your mouth. When fitted correctly they should kind of pop into place. If you are not happy with the fit, you can reheat and refit as many times as you need until you get a secure fit. Once you get accustomed to the fitting process, you may want to adjust the amount of fitting material used to get a fit that feels right for your mouth.