USB C Hub 8 in 1 with 100W PD3.0 Charging M.2 NVMe 10Gbps or SATA SSD Enclosure 4K@30HZ HDMI 1.4 USB 3.2 Gen2 10Gbps Transfer Multiport Adapter for MacBook iPad HP Dell ASUS Lenovo etc

Important Tips:

1. Before using, please review the tutorial video to learn how to install on Windows or iOS systems. Brand new SSD drive should be partition and format it first under disk management, then it can be used normally, otherwise it cannot be used. If the NVMe card is not recognized at all, it is possible that the issue could be related to the lack of partitioning on the new drive. Please check if the NVMe card has been partitioned before using it in the enclosure.

2. This SSD Hub comes with a one click hidden SSD function. If the system does not read your SSD after connecting, please try pressing and holding the button for 3 seconds to open the SSD;

3. SSD enclosure is for M.2 NVME/NGFF (SATA) M Key& (M+B) Key SSD. Applicable to sizes 2242/2260/2280 SSD. NOT Compatible with M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.

4. TF and SD slot can not use at the same time. 100W PD charging port is for charging only, not for data transmission. USB-C 3.1 Port is for data transmission only.

5. Before use, please confirm the PC devices USB-C port can be support fully function transmission(audio/video, data PowerDeliver etc).

6. To protect your SSD, it is not recommended to insert and remove the SSD multiple times.