Xiaomi Xiaoda Automatic Water Saver Tap Intelligent Infrared Induction Water Touchless Faucet Anti overflow Smart Motion Sensor Water Saving Device For Kitchen Bathroom

Xiaolang TDS automatic water supply, widely adapts to the mainstream bottled water specifications, one-touch rapid water flowing out, real-time water quality monitoring. Meet the multi-scene applications in the living room, kitchen, dormitory, office, and more.

In everyday life, after washing vegetables, fruits, and dishes, using infrared sensors is difficult to prevent obesity and certain bacteria in your hand, so you don’t have to manually turn the mixer on and off. Pure life. Xiaomi Xiaoda Automatic Water Saver Tap is an intelligent water-saving infrared sensor, it is a good choice supporting your ecological approach. Water-saving is carried out by the principle of motion detection. When you bring your hand to the tap, the device detects movement and then the solenoid valve opens or closes the water supply.

After installing the Xiaomi Xiaoda Automatic Water Saver Tap head, the user only needs to put his hand in the sensor area and the water will automatically flow; there is no need to perform the traditional turn of the tap handle, which saves more time. The touch tap is very convenient. If your hands are very dirty, you will turn off the tap by touching it. In addition, Automatic Water is equipped with a water flow sensor. A nozzle with an Automatic Water sensor allows users to switch water modes according to their needs.

Instant touch mode satisfies the need for using water for a short time, suitable for washing face and hands. Users only need to put their hands in the lower sensor area (within 10cm), water will flow automatically. When you remove your hand from the sensor area, the water supply automatically stops. If your hand is still in the sensor area, after 20 seconds, the water will automatically stop flowing. This feature saves water by preventing unnecessary waste of water, especially if you forget to close the tap.

The second mode is the continuous water supply mode. Users only need to place their hands in the side sensor area (within 5 cm), water will flow automatically. Running water supply time – 3 minutes. To turn off the water, you just need to put your hand in the sensor area again. This is an ideal design optimize for long-term use of water; suitable for cleaning items, washing vegetables and bowls. The water flow sensor head uses advanced technology using the MCU algorithm to optimize usage time.

Xiaomi Xiaoda Automatic Water Saver Tap uses advanced water injection technology. The water mixes with air bubbles, which makes running water softer, and the washing process is more efficient. The water flow rate from the tap to 0.07 l / s is much more economical than using traditional mixers. The mixer is designed quite simply and easily installed. In addition, the Automatic Water nozzle sensor is quite sensitive, it only takes 0.25 seconds to activate the water supply. Users only need to charge the device for 3 hours through the USB-charging port, the device will provide continuous battery operation for almost several weeks. When the battery is low, the Automatic Water Saver Tap will remind you to charge the device with a blinking light.

Specification:

Induction Range: Side sensor 0-5cm; Bottom sensor 0-10cm

Endurance: About 6 months

Waterproof Grade: IPX6

Hydraulic Pressure: 0.05-0.8MPa

Executive Standard: CJ/T194-2014