If it runs out, 4 Pieces Damaged Screw Extractor Drill Bit Set Broken Screw Bolt Extractor Extractor

4 Pieces Damaged Screw Extractor Drill Bit Set Broken Screw Bolt Extractor Remover

4 piece screw extractor set works with any drill and any screw size or bolt,
Perfect for removing stripped, broken, stuck or damaged screws and bolts.
Screw Extractor - Removes stripped screws in 10 seconds or less!

Usage instruction:
1.Choose a screw extractor smaller than the damaged screw.
Use a drill to drill a hole deep enough in the center of the screw head.
2.Remove the screw extractor and turn the screw extractor upside down
3. The hand drill was rotated clockwise slowly to drill, but do not use high-speed drilling

Material:

tungsten carbide tip

Length:

51mm/ 2.01 inch

Package Included:

4 Pieces Damaged Screw Extractor Drill Bit Set Broken Screw Bolt Extractor Remover

Important notes:

1. The extractor is designed for screws that slip or break the head, and the stuck or rusty screws need to be operated with the flashlight drill. And the speed should be slow, not too high or accelerate suddenly.

The whole process needs to reverse the operation, first open one head, then remove the other end, the success rate of removal is very high.

2. Hardness at 58 degrees -60 degrees, wood screw is no problem (not suitable for steel plate work)

3. The remover is suitable for orthodontic screws, anti-screws are not applicable

Q: What are the skills for beginners?

A: The bit rate can not be too fast, so low speed! The broken wire extractor is double-ended.

Step (1): The drill bit comes to the first drilling head, the speed needs to be based on different material settings.

The harder the material, the slower the drill speed

Step (2): When the extractor is removed, the drill should be reversed, and the rotation speed should not be too fast. Otherwise, it is easy to slip the teeth. The extractor should be able to slowly remove the screws.