Black with seat charging wireless car blowing and suction handheld vacuum cleaner, small car, household, portable high suction dust removal keyboard chassis

Product Color: Black 【 Product Material 】: ABS 【 Packaging weight 】: Net weight: 0.30KGS Gross weight: 0.560KGS 【 Packaging size 】: 184mm * 160mm * 60mm Rated voltage: DC 7.4V 【 Vacuum degree 】: About 5500pa for car use and about 5000pa for wireless use Rated speed: 35500rpm Lithium battery capacity: 2 units * 2000mAh 【 Charging method 】: 5V USB boost charging cable Rated power: 50W Noise: ≤ 84dB 【 Usage temperature 】: -20 ℃~+50 ℃ 【 USB cable length 】: about 1m 【 Product accessories 】: 1pcs straw, 1pcs brush, (1 set of swimming ring inflatable suction set) 1pcs instruction manual, 1pcs USB charging cable, 1pcs host, and 1pcs seat charger [Instructions for Use]: 1. Check if the battery is fully charged 2. Just turn on the switch 3. Replace the suction nozzle according to different usage scenarios 4. This product is a wet and dry dual purpose vacuum cleaner. When absorbing water, attention should be paid to opening the front cover in a timely manner to drain water 5. The USB display of the charging battery shows red as normal charging and green as fully charged 6. Charging time is about 3-4 hours, fully charged, and can last for about 30 minutes 【 Precautions 】: 1. When using, the filter screen must be installed 2. Do not use in direct sunlight or high temperature and pressure areas 3. Do not use gasoline or highly volatile detergents to wipe the body 4. The front housing cannot be removed when the motor is rotating 5. This product is a vehicle tool and is prohibited for children to use alone to avoid danger 6. Pay attention to the height of accumulated water in the front cover when absorbing moisture 7. When removing foreign objects from the gaps, please put on a duckbill straw. 8. Under normal conditions, it can usually be used for half an hour without affecting the car's battery 9. After using this product, please turn off the switch. When removing civilian items from the mesh bag, press the fastening button and then pour out the foreign objects