Screw, Advertising Nails, Fixing Pegs, Billboard Screws, Wall Fixing Screws, Sign Standoff Screws, Advertising Screws, Acrylic Nail, 8 Pieces (0.47 X 1.18 Inch)

Product Features: International Tooth Pitch: Cast with standardized dental equipment for high accuracy. Laser Surface Screw Head: The screw head adopts a laser surface, which is bright and beautiful. Casting Secondary Tapping: The screw tooth pitch is tapped twice for smoother rotation. Uniform and Flat Bottom: The bottom is welded at high temperature, even and flat with luster. Detailed Steps for Use: Use an electric drill to punch holes in the wall (the size of the drill bit can be determined according to the size of the expansion tube). Hammer the expansion tube into the wall with a hammer. Unscrew the base and screws of the advertising nail. Pass through the base with a screwdriver (from the direction of the largemouth to the small hole inside the base screw) and tighten. Screw rod through the billboard /sign, and then screwed into the base inside to tighten. After completion, as shown in the figure.