Wheel For Kick Scooter ‎27.31 x 12.07 x 2.54cm ‎27.31 x 12.07 x 2.54cm

A kick scooter (also referred to as a push-scooter or scooter) is a human-powered street vehicle with a handlebar, deck, and wheels propelled by a rider pushing off the ground with their leg. Today the most common scooters are made of aluminum, titanium, and steel. Some kick scooters made for younger children have 3 to 4 wheels (but most common ones have 2 wheels) and are made of plastic and don't fold. High-performance kickbikes are also made.the classic scooter design features a step-through frame and a flat floorboard for the rider's feet.this design is possible because most scooter engines and drive systems are attached to the rear axle or under the seat. Unlike a conventional motorcycle, in which the engine is mounted on the frame, most modern scooters allow the engine to swing with the rear wheel, while most vintage scooters and some newer retro models have an axle-mounted engine. Modern scooters starting from the late-1980s generally use a continuously variable transmission (cvt), while older ones use a manual transmission with the gearshift and clutch control built into the left handlebar.scooters usually feature bodywork, including a front leg shield and body that conceals all or most of the mechanicals. There is often some integral storage space, either under the seat, built into the front leg shield, or both. Scooters have varying engine displacements and configurations ranging from 50 cc (3.1 cu in) single-cylinder to 850 cc (52 cu in) twin-cylinder models.