Aluminum M.2 NVME SATA SSD Enclosure Adapter, USB 3.2 Gen 2 (10 Gbps) to NVME PCI-E SATA M-Key/(B+M) Key Solid State Drive External Enclosure Support UASP Trim for NVME/SATA SSDs 2242/2260/2280

m2 nvme sata ssd enclosure adapter reader case 02 Compatible with all M.2 NVMe and SATA SSD based enclosure adapter SSK NVMe SATA NGFF SSD enclosure adapter reader Package Included 1 x M.2 NVME SATA to USB 3.1 Type-C SSD Enclosure 1 x 10Gbps USB C to USB C Gen2 Cable 1 x 10Gbps USB A to USB C Cable 1 x Thermal Conductive Pad 1 x Screw Set : 4 screws (2*Scews A, 2*Screws B), 2 washers, extra screws in case of losing them SSK USB C M.2 NVMe SATA（NGFF）SSD Enclosure (Double Protocol SSD) M.2 NVMe PCIE /SATA（NGFF）SSD Based SSK M.2 NVME SATA SSD Enclosure adopts high performance controller Chipset RTL9210B, with high-speed data transmission speeds up to 10Gbps . 1GB file only takes 1 second ; Attention: It supports PCI-E based M key / (B&M) key M.2 NVME SSD read/write speed up to 10Gbps; SATA-based B&M Key M.2 SSD read/write speed up to 6bps. Not compatible with B Key Connectors. Does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Interface type: M.2 NVME and SATA to USB 3.1 Gen 2 Support SSD Drivers Size: 2242, 2260, 2280mm Case Size: 115*39*11mm Cable 1 : USB C to USB C(150MM) Cable 2 : USB3.0 AM to USB C(150MM) Color: Grey+Black Tool-free enclosure adapter nvme reader M.2 NVME PCIe M key & M.2 SATA (NGFF) B&M key Enclosure Adapter Only compatible with NVME and sata M Key and B+M connectors Not compatible with B Key Connectors. Does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Attention: NVMe and SATA SSDs are not included. If youdon't know which type is your SSD and you have any questions, please contact SSK Direct before purchasing. Main Features 04 07 07 Fashion Design for Excellent Heat Dissipation Adopts aluminum alloy shell, Slim design, durable and excellent heat dissipation, be portable and easy to carry. Attention: Due to the nvme SSD extreme transmission speed, the temperature is higher than USB3.0 HDD, we tested ours is around 50 °C in writing and below 40 °C in reading, even after a long time R/W, the speed will not drop down or device will not shut down. Extreme Data Transfer With USB 3.1 Gen2 interface,provides transfer speeds of up to 1000MB/s,1GB file1 second. Backward compatible with USB 3.1/3.2 Gen2 and USB 3.1 up to 10Gbps. Notice : Insert your NVMe or SATA SSD into the enclosure and connect to your laptop’s USB-C or Thunderbolt 3 port to transfer movies, music. The actual speed depends on the speed of your SSD, USB Port type, your computer performance etc, nvme ssd is not included. SSD needs to be fully inserted for working If there is a fatal errors or SSD can not be recognized: First, Please confirm your SSD is M.2 PCIE NVME SSD. Second, please confirm whether your SSD is fully inserted into the NVME Slot. If not, you need to push the SSD into the PCIE NVME Slot at a 45 degree angle.The pins of the SSD will be fully seated and covered. Main Features 03 05 06 Easy Installation With screw driver, no additional tools required. With two cables, USB A to C and USB C to C which suitable for all Host PC ports. Supports Plug & Play and Hot-Swapping Copper Strip + Thermal Conductive Pad for Excellent Heat Dissipation SSK Enclosure not only adopts the larger copper strip for heat dissipation, but also have a special design, it adds a plastic shrapnel which can lift SSD slightly. With the thermal pad, the lifted SSD can be tightly attached to the Aluminium shell, so as to achieve the purpose of rapid heat dissipation. Multi OS Compatible Windows 7 or above, Mac OS 10.10.5 or above, Linux, and Type C Android Phones. Blue Indicator is always on when plug in, and flash when read or write data.