Lcr-T7 Transistor Tester Multifunctions full Color Graphic display

About this item Warning: Always be sure to DISCHARGE capacitors before connecting them to the tester! The tester may be damaged before you have switched it on! Warning: We do not recommend using the tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged! 【wildly applicaton】A full-color display multi-function test instrument that can measure triodes, diodes, resistors, capacitors, inductors, thyristors, field effect transistors, regulators, dual diodes, light emitting diodes, infrared decoding. 【Support infrared coding】Automatic detection of zener diode 0.0130v. Self-test with automatic calibration. Support infrared coding. A key operation. Automatic shutdown (timeout setting). 【Infrared waveform display】Infrared waveform display. Infrared receiving instructions. The measurement results are displayed by TFT graphic. The data code and infrared waveform will be displayed,when the detector is successfully decoded(tips:After detection, align the infrared remote control with the "IR" light, then press the button in the remote control). 【structure】This LCR-t7 Transistor Tester Built-in high capacity rechargeable lithium ion battery. Lithium ion battery voltage detection. LCR-T7 new transistor tester TFT diode triode capacitance meter LCR ESR meter NPN PNP MOSFET infrared multi-function tester multimeter ꄴPrevious： LCR-TC1 1.8inch Colorful Display Multi-functional TFT Backlight Transistor Tester for Diode Triode Capacitor Resistor Transistor ꄲNext： - 160x128 TFT display - Multi function key - Transistor test area - Zener Diode test area - IR receiver window - Micro USB Charging Interface - Charge indicator LED 1.1 Features TC-V2.12k is a TFT graphic display Multifunction Tester. l Transistor Tester - - Automatic detection of zener diode 0.01-30V - Self test with automatic calibration l IR decoder - Support