RZoil RZ64E Intake Cleaner Foam Carbon X

"RZ64E Intake System Clean foam - Carbon X Technology Cleans and dearburizes the complete intake system of diesel and gasoline engines Cleans intake system , diesel particulate filter and turbocharger Removes carbon deposits Improvement of the air - fuel ratio Improves turbocharger reliability Restoration of turbocharging performance Optimizes the engine power Application : Intake system cleaning : Spray about half of the can with a long hose in the back part of the suction drawer . Pull the hose slowly out , so the foam is distributed everywhere . Wait about 20-30 minutes . Let the engine run and drive about 5 km or intermit for 2 minutes at about 3.000 rpm Check the cleanliness of the intake system . Wipe away any remaining deposit and repeat the process in the same way with the remaining half of the can DPF Cleaning : Remove the DPF pressure sensor . Spray the full bottle of foam with the long hose through the pressure sensor opening Wait about 20-30 minutes . Start the engine and run approximately 5-10 km or let the engine run for about 10 min at 3.000 rpm Turbocharger cleaning : Spray half the bottle of foam into the VTG turbo's announcement tube and permanently move the VTG adjustment manually . Wait about 20-30 minutes . Repeat the process with the rest of the can"