Silicone Cylinder Ice Cube Mold, New 3D Ice Cube Maker, Ice Grid Press Release, Easy Press Release Ice Cup

3D silicone ice molds can be used to make ice cubes. You can use it for various drinks such as cola, juice, coffee, milk tea. Material: food grade silicone + ABS Color: blue and green Mold: about 3.54*3.15*3.35 inches Ice cubes: about 0.5 inches Number of ice cubes: 60 Package list: 1 x Ice bucket Production steps: 1. Pull out the plastic inner cylinder and pour water into the silicone container, a little more than two grids, not more than two and a half grids; 2. Slowly insert the inner cylinder with the lid into the silicone cavity, pay attention to rotate it downward and hold it down, then gently press the silicone side under the lid to vent the inner cylinder to prevent the inner cylinder from floating; 3. Place the molds at room temperature for a few minutes; If you don't want to wait and press hard, you can pour an appropriate amount of hot water into the inner cylinder, pour the hot water for about 10 seconds, and then pull out the inner cylinder easily; 4. Press the outer wall of the silicone to adjust the angle continuously to remove the ice cubes. 5. We recommend freezing for 4-6 hours. Note: 1. Please allow 1-2cm differences due to manual measurement; 2. Due to the lighting effects and shooting angles, the color of the product and the color shown in the picture may be slightly different.