Highlights- 【Multifunctional Design】: Multifunctional design, support AC current measurement, DC current measurement, AC voltage measurement, DC voltage measurement, resistance measurement, capacitance measurement, frequency measurement, diode test.
- 【Backlight & Data Hold】: LCD backlight display, with higher the accuracy, in sunlight and dark conditions can be clearly seen. Font large design, easy to read data, very suitable for middle-aged and elderly electricians to use, easy to operate.
- 【4000 Counts True-RMS Measurement】: The digital multimeter has 4000 counts True-RMS for accurate measurements on nonlinear loads.
- 【Flashlight Illumination】: Easy to use, and suitable for a variety of working environments, you can use flashlight illumination in dark environments.(Only HT135A)
- 【Power Supply & Automatic Shutdown】: Powered by 3pcs 1.5V AAA battery(NOT included). To conserve power, if you do not operate the multimeter for 15 minutes.
OverviewSpecifications:
Model: HT135A / HT135D (Optional)
Display Type: Digital display
DC Voltage Measuring Range: 400mV/4V/40V/400V/1000V
AC Voltage Measuring Range: 4V/40V/400V/750V
DC Current Measuring Range: 400uA/4000uA/40mA/400mA/10A
AC Current Measuring Range: 400uA/4000uA/40mA/400mA/10A
Resistance Measuring Range: 400Ω/4KΩ/40KΩ/400KΩ/4MΩ/40MΩ
Capacitance Measuring Range: 4nF/40nF/400nF/4uF/40uF/400uF/4mF/40mF
Frequency Measuring Range: 10Hz/100Hz/1000Hz/10kHz/100kHz/1000kHz/ 10MHz
Temperature Measuring Range(Only HT135A): -20℃ ~ 1000℃ (-4℉-1832℉)
Range: HT135A: Auto range; HT135D: Manual range
Operating environmental conditions: CAT. IV 600V; CAT. III 1000V (Pollution level: 2, Altiyude: <2000m)
Operating temperature and humidity: 0~40℃(<80%RH,<10℃ non-condensing)
Storage temperature and humidity: -10~60℃(<70%RH,with batteries removed)
Maximum Voltage Allowed Between Measurement End and Earth: DC1000V / AC750V
Fuse Protection:
mA step: F400mA/250V fuse
10A class: F10A / 250V fuse
Sampling Rate: Approx. 3 times / sec
Counts: 4000Counts
Over-Range Indication: “OL“ is displayed
Live Test: √
NCV Test: √
Battery Voltage Test: Only HT135D Support
Diode Test: √
Continuity: √
Three-Phase Sequence Detection: √
True RMS: √
Low Battery Indication: √
Auto Power Off: 15 minutes
Backlight: √
Flashlight: Only HT135A Support
Material: ABS
Item Size: 177 * 83 * 49.5 mm / 6.97 * 3.27 * 1.95 inch
Item Weight: HT135A: 282g / 9.95oz; HT135D: 274g / 9.66oz
Package Size: 19.5 * 11.7 * 5.8 cm / 7.68 * 4.61 * 2.28 inch
Package Weight: HT135A: 452g / 15.94oz; HT135D: 432g / 15.24oz
Package List:
1 * HT135A Digital Multimeter
1 Pair * Detection Pen
1 * Temperature Probe
1 * User Manual (English)