Overview 6000W Pure Sine Wave Inverter
- This is a multifunctional pure shine wave solar inverter, integrated with a 80A MPPT solar charge controller, a low frequency pure sine wave inverter and a UPS function module in one machine, which is perfect for off the grid backup and self-consumption application.
- The whole system also need other devices to achieve complete running such as PV modules, generator, or utility grid. Please consult with your system integrator for other possible system architectures depending on your requirements.
- AC INPUT
- Voltage:230VAC
- Selectable Voltage Range:154-272VAC(for appliances)/184-272VAC(for UPS)
- Frequency Range: 50Hz/60Hz(Auto sensing)
- Maximum Charge Current:60A
- Operation Temperature Range:0°C to 40 °C
- Storage Temperature :-15°C to 60 °C
Connect a Variety of Electrical Appliances, the Combined Power Less Than 6000 Watt
Four Charging Modes
- Solar first mode: Use solar energy charge your battery, Utility power will charge battery only solar power not available.
- Only solar: Only use solar power charge your battery.
- Charging by Solar and Utility .
- Utility first mode: Use Utility power charge your battery, solar energy will charge battery only Utility power not available.
- NOTE: IF this pure sine wave off the grid solar inverter is working in Battery mode or Power saving mode, only solar energy can charge battery.
Three Output Modes
- Utility first(Default): Utility power your load as first priority, battery power and solar on when Utility not available.
- Solar first: solar energy power your load, battery energy active when solar power doesn't work.
- SBU Priority: Solar power first, then battery power, then Utility.
Silent Without Interference
- Package Contain:
- 1* The unit
- 1* User manual
- 1* Communication cable
- 1* Software CD
- Low noise at work.
- So quiet, your neighbors will thank you.
- This makes it ideal for camping, supplemental RV power and any other activity that requires quiet operation.
Mobile Phone Remote Monitoring
- The WIFI module (not include) is a plug-and-play monitoring device to be installed on the inverter. (WIFI module needs to be purchased separately)
- With this device, users can monitor the status of the PV system from the mobile phone or from the website anytime anywhere.
48V 6000W Pure Sine Wave Inverter
Before using this inverter, please read instructions carefully. Please strictly follow installation procedure when you want to disconnect AC or DC terminals. Be careful when working with metal tools on or around batteries. Never wire a frozen battery, make sure your battery is full when connect.