5-in-1 Electronic Household Meter, pH, TDS, EC, Salinity, and Temperature Tester with LCD Display for Water Quality, Suitable for Drinking Water, Aquariums, and Swimming Pools

Digital pH tester has the functions of monitoring TDS, pH, salinity, EC meter, and temperature measurement. TDS measurement range: 0-1000ppm, EC measurement range: 0-10000US / cm, PH measurement range: 0.01-14.00pH, salinometer measurement range: 0.00-25.00%, temperature conversion function. High-accuracy algorithm chip and electrode of our digital water ph tester ensure an accurate and fast response. When the measured value is stable, just press the HOLD/TEMP key to lock the measured value and take it out for viewing, which is really simple. A digital PH meter can detect the salinity of edible salt. At the same time, it can detect the salinity of seawater. Food salinity measuring range: 0.00-25.00%, seawater salinity measuring range: 10.1-200.0ppt. PH tester has a backlight LCD that helps you clearly see the measurement in any case. The automatic power-off function turns off the power after 5 minutes without any operation to save power. Employs a fully transparent liquid crystal (LCD) to display 4-digit values and the corresponding physical quantity units. Temperature can affect reading levels, Digital PH Meter for water hydroponics has an even better range of 0 °C-60 °C (32 °F-140 °F), automatic temperature compensation can ensure that you are getting the best reading, so you can test with confidence in any environment. Note: Every time you use this, you will need to clean the electrode. Calibration: Conductivity EC: Supports 3-point calibration automatic identification (1413us 12.88ms and 111.8ms) with 3 calibration points (1413uS/cm 12.88mS/CM 111.8mS/CM) pH: 1 point (6.86) or 2 points (6.86 4.00) (6.86 9.18) or 3 points (6.86 4.00 9.18) can automatically identify the calibration solution Packing list: 1 * Meter Digital Water Quality 1 * English manual