ELM327 V1.5 USB Scanner CH340 HS CAN/MS CAN For Ford elm327 obd2 Car Auto Diagnostic Tool PIC18F25K80 FORScan

OverviewTechnical Details: 1Latest ELM327 version for greater ford compatibility 2Manufactured modification to include a switch to connect to different CAN buses 3Designed for FORScan software 4Compatible with software venders; FORScan, Elmconfig, FF2 and FoCCCus, plus more 4MS CAN bus and HS CAN bus support 5Drivers and instructions included Product Description Introduction: One ELM327 OBDII OBD2 USB with switch. Designed for communicating with Ford, Mazda, Lincoln and Mercury vehicles. With this cable and the one of the supported software vendors you can detected modules which are not visible for regular OBD2 scanners. This includes showing you trouble codes, PIDs, running tests and services procedures which are never displayed by other OBD2 scanners and a standard ELM327. Basic Features: Reset fault /trouble codes / parameter ids (PIDs) Change car configuration data Run tests Services procedures Program certain models Pin Configurations: Switch position one: HS CAN - Occupies pins 6 and 14 Switch position two: MS CAN - Occupies pins 3 and 11 Supported Software: FORScan Elmconfig FoCCCus FF2 Plus more Modified EML: Please note that many Ford and Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus. ELM327 supports HS CAN from the stock, because Ford HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11. Supported Vehicles: All Ford, Mazda, Lincoln, Mercury vehicles that can be addressed using an ELM via an OBDII connector. Supported Protocols: FORD HS CAN FORD MS CAN