eSUN LCD UV 405nm Water Washable Resin 3D Printer Rapid Resin for LCD 3D Printers Quick UV Curing Photopolymer Resin Liquid 3D Printing Materials, 500g PEACH PUFF

OverviewThe molding precision is excellent, with high resolution, the surface of the product printed by water washable resin is smooth, and the printing details are visible. eSUN water washable 3d printer resin's mechanical properties, such as strength, toughness, and rigidity, are balanced. Low viscosity, high release rate, easy to print. 3D PRINTING PHOTOPOLYMER RESIN Properties Table 3D PRINTING PHOTOPOLYMER RESIN Water Washable Resin Viscosity(mPa·s) 110-180 Density(g/cm3) 1.10-1.14 Tensile Strength(MPa) 19-46 Elongation at Break(%) 17-30 Flexural Strength(MPa) 15-50 Impact Strength(J/m) 37-97 Tearing Strength(GPa) / Heat Distortion Temp(℃) / Hardness(Shore D) 74-82 Grades (out of 10) Strength（S） 6 Toughness（F） 7 Forming（P） 8 Accuracy（S） 8 Speed （A） 8 Recommended printing parameters Settings Machine Type Low Light Intensity Medium Light Intensity High Light Intensity (Monochrome LCD Screen) Representative Machine AnyCubic Photon eSUN LCD 3.0 Nova Bene 4 Creality LD-002R Anycubic MONO X ELEGOO Saturn Phrozen Sonic Mini Exposure Time/s 8-10 5-6 Not recommended Bottom Layer Count 3-5 Bottom Exposure Time 40-60 30-40 Not recommended Lifting Distance/mm 5.5&6-inch screen：5-6 or Higher ; 8.9&13.3-inch screen：8-12 or Higher Lift Speed/mm·min-1 90-150 90-120 Not recommended Retract Speed/mm·min-1 150-200