Original LCD Screen and Digitizer Full Assembly with Frame for Xiaomi Redmi Note 11S 4G/Poco M4 Pro

Before Installation Notes

Tips 1: Test before installation

When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.

Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.

Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.

Tips 2: Simulates testing

Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.

Tips 3: Do not over-bend cable

Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

About the product

1. Replacement LCD screen + touch screen digitizer assembly with frame for Xiaomi Redmi Note 11S 4G 2201117SG 2201117SI

2. Replace your broken or unusable item with a new one

3. Make your device look more refreshing than ever

4. Completely fit and work

5. Each item has been checked and in good condition before shipping

6. Professional installation is highly recommended. We will not be responsible once the screen is installed