Important: For the first time, please try some tea or rice first, and regularly set the timer as one to clean the crushing bin and remove oil stains and smell. For large hard materials, first break them into small pieces or cut them into slices, and then crush them for about 40-60 seconds. If you see steam comes out of the machine while you started for the first time, there's no issue, as it happens sometimes due to not warming up the machine or over filling with materials and not paying attention to the bowl capacity. It can be turned On later after cooling down the machine. Or if it didn't help, then check for the red button ( safety fuse button) and push it down. And if the above points didn't help then you need to change the cable fuse only as you might have blunt out the cable fuse which needs a replacement. Reminder: There will be a collision sound when you start to crush the materials with fiber. They have become powder when you hear the sound is even, and you can shut down the machine. The timer can be manually closed. You can not grind continuously for a long time. It will take one minute for normal materials to prevent heat and air pressure, which is DANGEROUS.
Material | Stainless Steel |
Installation | Countertop |
Colour Name | Silver |
Energy Used | Electric |
Wattage | 850 W |
What's In The Box | 1 x Multifunction Grinder |
Model Number | ARTC 150g |
Model Name | ARTC GRINDER |