USB WiFi (802.11b-g-n) Module with Antenna for Raspberry Pi

OverviewLooking for a way to make your device cable-free? Okay so since adding WiFi is the solution for a cable-free device, you can try this product out; take advantage of the low cost yet reliable performance. You can use it for either Raspberry Pi or Beagle Bone in which it requires no kernels. Keep reading through this for more details about what you will be encountering for these two. Beagle Bone: Since WiFi requires high power, 5V 2A power adapter is required for it to work, and be careful, since the result won’t be gratifying if you don’t follow this advice. Check this out for a useful tutorial: tutorial for using this module with the Beagle Bone! On the other hand, using it for Raspberry Pi requires a power hub, and what supports it is the latest Wheezy distributions, check this for a tutorial on setting the WiFi up: Check out our detailed tutorial for how to set up WiFi networking on the Pi. (probably you’ll need a powered hub) Wireless Standards: IEEE 802.11n (draft), IEEE 802.11g, IEEE 802.11b Host Interface: High speed USB2.0/1.1 interface Data Rate: 802.11n: up to 150Mbps (downlink) and up to 150Mbps (uplink) , 802.11g: 54 / 48 / 36 / 24 / 18/ 12 / 9 / 6 Mbps auto fallback, 802.11b: 11 / 5.5 / 2 / 1 Mbps auto fallback Frequency Band: 2.4GHz ISM (Industrial Scientific Medical) Band/li> Chipset: Realtek RF Frequency: 2412 ~ 2462 MHz (North America), 2412 ~ 2472 MHz (Europe), 2412 ~ 2484 MHz (Japan) Radio Channel: 1 ~ 14 channels (Universal Domain Selection) Range Coverage: Up to 3 times farther range than 802.11g Antenna Type: Integrated Antenna Roaming: Full mobility and seamless roaming from cell to cell RF Output Power: 13 ~17 dBm (Typical) Modulation: 11n: BPSK, QPSK, 16QAM, 64QAM with OFDM, 11g: BPSK, QPSK, 16QAM, 64QAM, OFDM, 11b: DQPSK, DBPSK, DSSS,