Wire Twisting Tools, Wire Stripper and Twister, Quick Connector Twist Wire Tool, 4 Square and 2.5 Square, 2~5 Way Twister Wire, for Stripping and Twisting Wire Cable at the Same Time

" 3 Pieces Wire Twisting Tools The stranding tool can be installed on the electric drill. Put the wire into the stranding tool and turn on the switch. You will get three-wire stripper tools, one is 3 wires 4 square meters, 1 is 3 wires 2.5 square meters, and 1 is 5 wires general-purpose type. Improve Work Efficiency The stripping twisting tool works with electric drills, the wire twisting tool can twist and wrap the wire at the same time; It can help to increase productivity, prevent hurting fingers, and relieve fatigue. Durable Material Made of durable metal material, not easily broken; Good performance even under the harsh condition, not afraid of collision, and can work continuously without waiting. Easy to Operate The wire twisting tool can be attached to a power drill, it has a complete range of functions; When you are ready, turning on the drill, you can complete the work smoothly. Attention For your safety, you must always turn off breakers before working on electrical systems. How to Use: Prepare the wires. Do not strip the wires. Clamp them flat with pliers. Insert the wire winder bit into the drill and clamp the collet. Insert the wires to be stranded into the front hole of the winder. Clamp the wires with pliers. Press the wire winder against the side of the pliers as far as possible. Slowly start the drill to turn the wire winder. Press the wire winder gently onto the pliers. When the winding is complete, cut the wire to a length that fits the size of the wire cap you are using and remove the remaining wire from the winder. "