Jenix 220250 Volts Ip 68 Water Tank Float Sensor Switch for Water Level Controller With 3 Mtr Cable Wire Select NONC Pack of 3

Float Water Level Controller WLC Square Head Float Switch Wired Sensor Security System Wired Sensor Security System INSTRUCTIONS for INSTALLATION Insert the cable in the counter weight yellow color part from the conical part and rotate it Thus causing the plastic ring inserted in the opening to become detached if necessary this operation can be facilitated with the use of a screwdriver The ring should then be positioned in the point where it is desired to block the counterweight Force the counterweight on the ring by rotating it using a slight pressure Cable 2 Meter ie customize wire lenght is available A float switch is a device used to detect the level of liquid within a tank The switch may be used in a pump an indicator an alarm or other devices Use Water Level liquid level Controller etc Instructions for use for the filling operation Connect the blue control cable to the electric pump and the black wire to the neutral wire as shown in the picture to fill it with water the brown wire must be waterproof The electric pump begins to fill with water and when the water in the tank reaches a level stops working Instructions for use for the emptying operation For the draining operation connect the brown cable to the water pump and the black cable to a neutral cable as shown in the picture the blue cable must be insulated The electric pump stops when the water level reaches a level and if it exceeds this level it starts again to expel water