Car Alarm System RFID Push Engine Start Button & Keyless Go System for Vehicle Anti-Thief Double Layer Start Protection

OverviewCar Engine Push Button Start Stop Keyless Entry System Starter This is a simple and easy use Car Alarm with Finger Engine Start Push Button Start Stop and Transponder Immobilizer. RFID Car Engine Push Starter is easy to install and use, can start or stop your car much easier and keep your car safe at the same time. This item is only work with DC12V cars.※ 1. Professional car alarm installer installation is highly recommended. 1. A spare key is needed if your car has steerl wheeling lock2. 3. A spare key chip is required if your car has a chip lock 4. An extra bypass module is needed if your car has an original immobilizer Features: 1. One push button to start or stop the engine. 2. Open acoustics and dashboard function. 3. Automatically lock the host after stalling 30 seconds. 4. Can be matched your car alarm system or keyless entry system. 5. Immobilizer, with warded lock card anti-theft function, the system will re-enter arming mode after 15 seconds automatically if did not press the start button. 6. RFID engine lock. In arming mode, when the key gets close to the detection circle(about 2-5cm), the system will sound Bi Bi, which indicates the system is disarmed. Otherwise, the start button will not work.※7. Service mode. the ID card can enter a service mode to bypass the Immobilizer, in this mode, user could push start the engine directly, do not need the ID card. ※8. Code learning. Master card can delete former ID card(in case one card lost),all former ID cards will no function. and then learn any card with new code. Specifications: Material: ABS Color: black Size: 10.5*8.5*3.2cm Voltage: 12V Package Included: 1 x Car Engine Push Starter Host 1 x Push Start Stop Button 1 x RFID Sensor Ring 2 x RFID Key 1 x Installation Wire 1 x User Manual