Drop Earring Necklace Resin Epoxy Mold - Code: 78

 

 

Drop Earring Necklace Resin Epoxy Mold -5.4 x 3.9 x 0.8 cm

Resin epoxy silicone injection molds are heat-resistant and easily removable, that is, they are resin epoxy molds that can be quickly dried in resin epoxy castings and can be preserved in a high temperature environment between 200 and 300 degrees on average. In addition, our silicone molds are resin molds that can be used many times and are not disposable. Resin epoxy molds, which can be used in many areas, are ideal for your imagination. Depending on the purpose, it may create differences in many sectors. We currently have more than 600 resin epoxy mold models in Turkey.

 

Usage: Pour 1 measure of hardener into a container with 2 measures of resin and mix slowly until there are no air bubbles. Continue mixing from right to left and from left to right.
and mix thoroughly from bottom to top for 2-3 minutes. While mixing
A homogeneous mixture should be achieved by touching the bottom and sides of the container with the mixing stick.
Then the mixture is rested for 5 minutes and poured into the mold and left to dry. 
It can be touched by hand after about 6 hours. It hardens completely within 12 hours.
It becomes a scratch-proof glass in 48 hours. Color: Transparent 

Product Code: GJ038

Important warning:

• The mold life is generally 10 years, and for some of our model molds it is between 20-25 years.
• By taking good care of your mold, you can ensure that you use it for longer periods of time with processes such as usage and cleaning stages.
• We recommend using mold release spray; this mold release spray or wax varnish protects the shine of the mold and provides a long service life.
• Non-alcohol based wet wipes are the most effective material for cleaning the remaining epoxy liquids.
• Never clean silicone molds with alcohol or solvent-based products, and be careful not to touch the inside of the mold with your fingers.