Gedeo Latex 250 ML Pebeo

Concentrated formula based on natural rubber. Allows the molding of simple and complicated shapes, small and large thinner objects and masks. For professional adults. Warning: Hazardous product, follow instructions. Protect from freezing. To make a mould, Latex can be brushed over an object/surface in multiple layers or alternately an object can be dipped in Latex. Gedeo Latex Instructions for Use: Embossing by brush to produce masks or low relief moulds: apply an even layer allow to dry (you can accelerate this with a hairdryer) build repeated coats until you have at least 2mm thick covering on wide moulding use plaster strips to hold the mould shell Dipping: dilute 50/50 with water dip the object in the mixture for 1 minute remove and drain repeat until a coat of 1.5 - 2mm is built up allow to dry completely (12 hours) before removing Gedeo Latex coating from object by turning inside out (rolling the Latex back) dust with talcum powder before turning it back the right way Casting recommendation: coat the interior of the mould with Demoulding Vaseline before filling with resin